|
The WinFrog Controlled Remote Tug
Telemetry Module enables one WinFrog system to control,
monitor and track other WinFrog systems. Available
as an extension to the core WinFrog program, this
module provides the convenience and control of operating
remote WinFrog systems from one controller system,
as well as an operational area safety factor.
With the combination of the Controlled
Remote and MVP&T Modules, one WinFrog system can
control up to 10 remote WinFrog systems. Communication
between the control system and the remote sites can
be via radio telemetry using WinFrog’s wireless
token ring network, over a LAN using TCP / IP protocol,
or via a combination of these two methods.
The central WinFrog system, or controller,
can control the operation of the remote systems, including
the application of device data to the positioning
of the remote vehicle, all sensor and vehicle offsets,
vehicle presentation, line and waypoint tracking,
eventing, graphics and transmission of the raw, positional
and event data back to the controller. The controller
can also re-broadcast the information of any remote
vehicle it is tracking to any other selected remote,
allowing the controller to control how each remote
operates and what they are able to track. The inclusion
of fairlead and anchor data provides an increased
level of operating safety for work vessels.
|
|
overview